Applying hot wax

 

Melt wax on the plate of the iron
Drip wax onto the base. Ensure that wax is applied evenly. Tip:For mixtures, simply hold the wax sticks together and possibly tie an elastic band around them

Iron in wax
Push or pull the iron evenly over the gliding surface. If the iron does not glide smoothly, drip on some more wax.

Uncover side edges
Uncover the edges immediately after waxing (professional technique)

Scrape off wax
Use the Plexi blade to scrape off the wax from the base in the running direction after about an hour.

Tip: The longer you leave the wax to cool and, therefore, harden, the faster the skis/Boards will be.

Brush out base structure
Brush out the base structure in the running direction with the copper brush. For cold snow conditions (harder waxes), use the nylon brush to polish the base afterwards. Use the horsehair brush for the finish.

Sharpen the Plexi blade
Pull the Plexi blade across the blade sharpener, which is suitable for various blade widths.

Steel Wire
Tip:The professional service technician uses the Toko Steel Wire to brush out the ski especially for speed disciplines. The structure is thus perfectly freed-up – these skis have optimal "pull” at high speeds.